Video Switcher  (150-1274)  Rear Panel Connections     Faxback Doc. # 7292

Use the shielded video/audio cable Catalog Number 15-1535 that has the
RCA phono plugs at either end.

Connect your first source of video, Source A, to the group of jacks on the
left side of the rear panel.  Connect the second source to the B group.

The two groups of jacks on the back of your Switcher are labeled A and B
to differentiate between the two sources of video being edited to the
recording VCR.  The top row of jacks are the output jacks.  The bottom row
of jacks are the input jacks.

1.  AUDIO A IN Jacks

Connect the left and Right audio input jacks, the white and the red jacks
on the bottom left of group A, to the corresponding Left and Right AUDIO
OUTPUT jacks of the first video unit - Source A.

2.  VIDEO A IN JACKS

Connect the video input jack, the yellow jack on the bottom right of group
A, to the VIDEO OUTPUT Jack of your first video unit - Source A.

3.  AUDIO A OUT Jacks

Connect the Left and Right audio output jacks, the white and the red jacks
on the top left of group A, to the corresponding Left and Right AUDIO
INPUT jacks of your recording VCR.

4.  VIDEO A OUT Jack

    Connect the video output jack, the yellow jack on the top right of
    group A, to the VIDEO INPUT jack of your recording VCR.

Note:  On some VCRs, the VHF/UHF inputs are automatically disabled when
       connections are made to the audio/video input jacks.  Other VCRs
       allow manual selection of the input source.  If your VCR is of the
       former type, you will have to unplug the connections to the VCR
       audio/video input jacks when you want to record antenna broadcasts
       or cable TV signals connected to the VHF/UHF inputs on the VCR.

5.  AUDIO B IN Jacks

Connect the Left and Right audio input jacks, the white and the red jacks
on the bottom left of group B to the corresponding left and right AUDIO
OUTPUT jacks of your second video unit - Source B.

6.  VIDEO B IN Jack

Connect the video input jack, the yellow jack on the bottom right of group
B, to the VIDEO OUTPUT jack of your second video unit - Source B.

7.  AUDIO B OUT Jacks

The Left and Right audio output jacks, the white and the red jacks on the
top left of group B, may be connected to the corresponding Left and Right
AUDIO INPUT Jacks of a second recording VCR, a television monitor, a
stereo receiver, or a video/audio control center.

8.   VIDEO B OUT Jack

The video output jack, the yellow jack on the top right of group B, may be
connected to the VIDEO INPUT jack of a second recording VCR, a television
monitor, or a video/audio control center.  See Variable Connections for
connections to different video and audio components.

POWER Cord Plugs into a standard AC outlet, 120V, 60 Hz.

Notes:  1.  If you are using monaural VCRs, Use AUDIO IN jacks only.
            These jacks accept monaural input signals and provide them to
            both L and R channel input automatically.

        2.  The source signal selected with the front panel SOURCE switch
            is always present at both A and B AUDIO.  VIDEO OUT jacks.
            The signals of A and B OUT jacks are exactly the same.

(br/all-8/10/94)