3100  (250-1632)             Troubleshooting           Faxback Doc. # 5511

This section will help you correct problems you might encounter while
setting up or using your computer.  Refer to the "SVGA Video" section for
video troubleshooting suggestions.

F1 SETUP error when you start up your system

-The setup utility was not run correctly.  Refer to the "Utilities"
 section.

-The CMOS RAM battery might need replacing.

No Response to Keyboard Input

-Is the keyboard cord plugged in correctly and securely?

-Is the computer turned on?

Setup Problems

-Are the system cords plugged in securely?

-Is the power outlet operating correctly?  (Check by plugging another
 device into the outlet).

-Are all expansion adapters firmly seated?

-Are all jumpers set correctly?

-Is the information entered with the setup utility correct?  Select the
 correct settings in the setup utility.  (If this does not work, turn off
 the computer and remove the battery; replace it after 30 seconds.  Run
 the setup utility to reconfigure the system.)

-Is the battery properly installed?

-Is your hard drive properly configured?

Options Not Working

-Is the option expansion adapter firmly seated?

-Are all system cords plugged in securely?

-Are drive data and power cables connected correctly?

-Are all switches and jumpers set correctly?

-Was the setup utility run after installation?

-Is the information entered with the setup utility correct?

(smc-01/04/94)