DMP 310 (26-2876)      Using the Hex Dump Feature      Faxback Doc. # 4708

This feature lets you print the hexadecimal information the computer sends
to the printer. You can use this feature as a diagnostic tool when you have
problems with the computer of the software.

Follow these steps to use the hex dump feature.

1. Load paper in the paper cassette. See "Using the Paper Cassette."

2. While you hold down ON LINE|OFF LINE, set POWER to | (on). When the
ON LINE indicators lights, release ON LINE|OFF LINE.

3. Send the print command from your computer.

NOTE: The last part of the computer file might remain in the printer's
buffer. When the computer stops printing, press ON LINE|OFF LINE so that
the ON LINE indicator turns off. Then, press ON LINE|OFF LINE so that the
ON LINE indicator lights. This prints any information remaining in the
printer's buffer.

4. Set POWER to O (off) to exit the hex dump mode.

(dkh-07/27/93)