LP 800  (260-2890)            Printer Selftest         Faxback Doc. # 4108
 

This printer has three test print functions. Perform a test print whenever
you need to check the status of the printer's various settings or to make
sure the printer is functioning properly.

Self Test:

The self test prints the self test pattern.

1. Place the paper in the multipaper cassette.
2. Turn on the printer.
3. If the printer is on line, press ON LINE to set it off line.
4. Press UP ARROW and DOWN ARROW at the same time.
5. The printer displays SELF TEST and the test print begins.
6. When the test print is over, press ON LINE to return the printer to on
   line.

Note: The test print is different if you select EPSON or IBM mode.

Font Test:

The font test prints a list of selectable fonts.

1. Place paper in the multipaper cassette.
2. Turn on the printer.
3. If the printer is on line, press ON LINE to set it off line.
4. Press PRINT FONT/TEST.
5. The printer displays FONT PRINT and the test print begins.
6. When the test print is over, press ON LINE to return the printer to on 
   line.

Status Print:

The status print prints a report on the printer's status.

1. Place paper in the multipaper cassette.
2. Turn on the printer.
3. If the printer is on line, press ON LINE to set it off line.
4. Press and hold PRINT FONT/TEST until the printer displays STATUS PRINT.
5. The test print begins.
6. When the test print is over, press ON LINE to return the printer to on
   line.

(dtc-08/06/93)